Albedo100 Animal is a semi-transparent spray with light-reflective properties intended for use on fur. The spray has a light grey shade that might be perceived as colourless but is light-reflective in the dark.
In the case of heavy wear you are recommended to spray continuously in order to regain full effect. If the animal has thick fur you are recommended to spray from a greater distance and for a longer period of time. The spray may adhere for up to a week after application. Add more spray to regain full effect. Highest visibility is achieved if you spray on moving parts e.g tail/legs. You can easily create reflective signs and symbols by cutting out, and spraying on stencils.
How does it work?
Albedo100 Animal is most effective when sprayed on the animals fur/coat. Ideally spray on limbs or moving parts such as the tail to get the most out of the reflective properties. Test the effect by shining a light, held at eye-level, upon the sprayed surface. Alternatively taking a photo with flash e.g with your mobile phone camera, or watching the object from a car with the headlights on, from a distance. The spray is easily washed off with water, soap or shampoo and does not affect the fur.
How to use
1. Always spray outside or in well-ventilated areas. Shake the can vigorously +1 minute (at least 20 sec after you hear the bulb inside). Repeat during application.
2. After shaking, spray immediately from a distance of approximately 1 foot, with even swiping movements. Hold the can upright while spraying. Do not over-apply. Dries in a couple of minutes at normal room temperature.
3. Clean the nozzle after use, by spraying upside down for 1-2 sec.